SPON NAS-8523C - IP PoE Intercom

Features of SPON 8523C IP POE WALL MOUNT INTERCOM STATION

● Mainly used for security audio intercom in bank vault, prison, dust-free workshop, parking lot and other special application environments.
● Supporting embedded installation or wall-mounted installation.
● Adopting 6mm thickness aluminum panel with special screws, effectively against collision, puncture or other man-made damages.
● Built-in 3W speaker and microphone, available for hands-free calls.
● Single button (dual button) design, applicable to consulting service, emergency intercom, being able to realize full duplex intercom.
● Built-in digital audio processor and digital noise reduction technology, effectively improve the voice collection distance and sound quality.
● Equipped with 1×Alarm Input interface to be connected with emergency button, infrared detector or smoke detector.
● Equipped with 1×Alarm Output interface for external linkage with alarm light or electronic door lock.
● Supporting tamper alarm function, being able to activate warning siren whenever the equipment has been forcibly damaged.
● Compatible with standard SIP (Session Initiation Protocol), can be registered to VoIP telephone system (mainstream IP PBX such as CUCM, Asterisk, Yealink, etc.) independently.
● Supporting PoE (Power over Ethernet).
● Supporting initiating & receiving offline intercom without centralized management server software.
● Equipped with standard RJ45 interface, accessible to the system wherever Ethernet is available, supporting cross-segment and cross-router.

● Optional: NAC-11 waterproof case (protection grade could reach IP54).

Description

>> EASY CONFIGURATION

User can easily configure its web parameters using its IP address after connecting it into the existing LAN/WAN network.

When you first log into the web GUI, after setting the IP address of the server (the PC on which SPON™ XC-9000 software was installed), you can manually assign a static IP address to the intercom. Apart from the settings of network parameters, you can also use the web GUI to configure other parameters of the intercom such as intercom input & output volume, automatically answering , network adaptability, web interface login username & password, firmware upgrade, etc.

POWER PARAMETERS
Power Supply: DC24V/1A、PoE IEEE802.3af
Standby Power Consumption:≤3W

AUDIO PARAMETERS
S/N (Signal-to-Noise) Ratio:Broadcast-Speaker:81dB、Broadcast-Line:88dB、Line in-Record out:82dB
Audio Sampling & Bit Rate:22.05KHz 16bit，8kbps-320kbps
Built-in Speaker(Power output):3W
Built-in Speaker(Impedance):8ohm
Built-in Mic:Electret Microphone
Built-in Mic(Sensitivity):-45±3dB
Built-in Mic(Directivity):Omnidirectional
Harmonic Distortion:＜1%
Frequency Respinse:40Hz~10KHz（WAV）、50Hz~20KHz（MP3）

NETWORK PARAMETERS
Network I/F:10BASE-T/100BASE-TX RJ45
Network Protocol:TCP/IP、UDP、ARP、ICMP、IGMP、SIP、HTTP、FTP
Configuartion Method:Web Interface

MECHANICAL&ENVIRONMENT PARAMETERS
Mounting Method:Wall-mounted 
Installation Environment:Dry Indoor Locations
Operating Temperature:-20℃～55℃ (-4℉~131℉)
Operating Humidity:≤90% RH non-condensing
Body Material:Aluminium alloy 
Color:Silver
Back Shell Material:Steel
Product Dimension:101x191x46mm
Product Weight:0.95 kg
Product Warranty:2 Years

ACCESSORIES
1×Power Adaptor(24V/1A)
4×Allen Screw(M3*12)
1×Allen Wrench(2.5mm)
1×Wiring Terminal(3.5-2P)
1×Wiring Terminal(3.5-3P)
4×Half Round Head Philips Screw(ST4*25)
1×Red-Black Line(X2-80)
1×Red-White Line(X12-100)
1×Quality Certificate&Warranty Card
1×Quick Installation Guide