A200

Technical Specifications

• From 2 to 24 ports supported, mixing FXO and FXS interfaces, as required
• Support for the Asterisk^®, FreeSWITCH^®, Yate^™, CallWeaver^™, PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications
• Single synchronous PCI and PCI Express interface for all 24 FXO/FXS ports
• Four RJ11 ports per Remora^™ card
• Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis
• Short 2U compatible mounting clips available for installation in 2U rack-mount servers
• 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention
• Autosense compatibility with 5 V and 3.3 V PCI busses
• Fully PCI 2.2 and PCI Express compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts
• Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features can be added when they become available
• Maximum operational power for PCI: 3.75 W (0.75 A @ 5 V) + 4.2 W (0.35 A @ 12 V) perFXS module
  For PCI Express: 2.64 W (0.8 A @ 3.3 V) + 4.2 W (0.35 A @ 12 V) per FXS module
• Temperature range: 0 - 50^°C
• Shipped with standard RJ11-terminated cables

Get the Fax on Sangoma Hardware

• With Sangoma, there is no need for a separate analog line to run your fax machine
• Using T1/E1 passthrough with Sangoma analog cards, there are no clock slips, buffer overruns, or transmit underruns that cause missed lines, blank sheets, and missed pages when faxing
• Sangoma A200 and A400 cards synchronize perfectly with digital T1/E1 cards and thePSTN atomic clock for error-free fax and modem passthrough and superior voice quality over T1 and E1 lines

Optional DSP Echo Canceller Daughterboard on the A200D

• G.168-2002 echo cancellation in hardware
• 1024 taps/128ms tail per channel on all channel densities
• DTMF decoding and tone recognition
• Voice quality enhancement: music protection, acoustic echo control and adaptive noise reduction
• No CPU load as a result of echo cancellation
• Does not increase the physical size of the card, and no additional slot is required

Wiring Connections

• The A200 and Remora^™ cards incorporate 4-pin RJ11/4 narrow jacks, such as those used in telephone handsets
• Each Sangoma A200 Card is shipped with four 2 m cables terminating in a narrow RJ11/4 plug at one end and a telephone-standard RJ11/6 plug at the other
• To hardwire the A200 system, you can purchase a kit of 12 RJ11/4 plugs and a crimping tool, sold separately

Operating Systems

• Windows^® 2003, Windows^® XP, Windows^® Server 2008, Windows^® Vista, Windows^® 7
• Linux (all versions, releases and distributions from 1.0 up)

Certifications

FCC Part 15 Class A, FCC Part 68, and EN 55022 Class A, JATE
Technical certifications in Russia and Malaysia

Diagnostic Tools

WANPIPEMON^®, SNMP, system logs

Architecture

The A200 consists of a Remora^™ daughterboard mounted on the AFT PCI card. The Remora card has two sockets each of which can accept a FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS lines, respectively.

Up to five additional Remora^™ daughterboards can be mounted in empty slot positions beside the A200 assembly, connected to the A200 by a backplane bus connector.

Production Quality

ISO 9002

Warranty

30-day "no questions asked" return policy.