Product Name | 12 Ports Full Gigabit Managed Industrial PoE Switch |
Product Model | HR600-AFG-84F-SFP; HR600-ATG-84F-SFP |
Interface | 8 x 10/100/1000M copper RJ-45 ports, 4 x 1000M SFP port ,1 console |
Network Protocols | Support IEEE802.3,IEEE802.3u,IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.1d, IEEE802.1w |
L2 ( Layer 2 Switching ) |
Port management | Enable / disable port Speed, duplex, MTU settings, etc. Flow-control flow control setup Port information view, etc. Support port access direction, VLAN image To support the port speed limit, Support port isolation settings Unknown unicast, multicast, broadcast storm suppression |
Spanning Tree Protocol | Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s |
Link Aggregation | Support static manual aggregation, Support LACP dynamic convergence IEEE 802.3ad |
VLAN | Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs) ;n Support Port based VLAN and IEEE 802.1Q VLAN |
IGMP snooping | Support static add / delete, Support v1/2/3 dynamic multicast listener, supports 256 multicast groups |
GMRP | supports GARP multicast registration protocol |
MAC | Support static add / delete MAC address learning limit Support dynamic aging time settings |
Extended function |
ACL | based on the source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number Support time-range time management |
QOS | based on 802.1p (COS) classification Based on DSCP classification Based on the source IP, destination IP, port number classification Support SP, WRR, DRR scheduling strategy Support traffic speed limit CAR |
MPLS | MPLS supports static LSP Support VPN MPLS |
LLDP | supports LLDP link discovery protocol |
802.1x | Support 802.1x port authentication (Radius, local) |
Prevent attack |
DOS defense Support for CPU protection, limited to send CPU message rate ARP binding (IP, MAC, PORT binding)
|
System management
| User add / delete user User login, operation, status, event log Device reset, configuration save / restore, upgrade management, time setting, etc. |
Management function |
CLI | support serial command line management |
TELNET | support serial command line management |
SSH | supports SSHv1/2 remote management |
SNMP | support v1/2/3 |
ColdStart, WarmStart, LinkDown, LinkUp |
WEB | supports two layers, three layers of view, etc. |
Other parameters |
PoE Specification | PoE Standard: Supports both IEEE802.3af and IEEE802.3at |
Single PoE Port Power Output: Max. 15.4 watts (IEEE 802.3af) Max. 30 watts (IEEE 802.3at) |
PoE port Auto detect AF/AT devices |
PoE Port Output Voltage: DC48V |
Power Pin Assignment:1/2+;3/6- |
Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) |
Fiber Media | Multi-mode: 1310nm, 2Km Single-mode: 1310nm, 20; 1550nm, 40/60/80Km |
Performance Specification | Bandwidth: 24Gbps Packet Buffer Memory:4M Packet Forwarding Rate:1488000pps/port Address Table: 8K |
Forwarding Mode | Store-And-Forward |
LED Display | Fiber Run indicator: FX1,FX2,FX3,FX4 Power supply indicator: PWR PoE ACT indicator: LED-Yellow 1000M LINK indicator: LED-Green |
Power Supply | Input Voltage: DC48V (48~55V) Type of input: 6 pins terminal block No-load consumption: MAX 5W@ DC52V0.1A Full-load consumption: MAX 65W@ DC52V1.25A (802.3af) Full-load consumption: MAX 104W@ DC52V2A (802.3af+) Full-load consumption: MAX 130W@ DC52V2.5A (802.3at) |
Working Environment
|
Working temperature: -40~75℃ Storage temperature: -40~85℃ Relative Humidity: 5%~95 %( no condensation)
|
Industry Standard | EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD) EN61000-4-4 (EFT) EN61000-4-5 (Surge) Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Mechanical Structure | Shell: IP30 protect grade, metal shell Installation: DIN-Rail or Wall mounts |
Certification | CE mark, commercial FCC Part 15 Class B VCCI Class B EN 55022 (CISPR 22), Class B |
MTBF | 300,000 hours |
Warranty | 5 years |