Escene WiFi Accesspoint AP-3

EWFC Q&A

Q1: Are you complaining low quality voice and unstable connection of your wifi phone?
A   : Escene 5.8G HZ WIFI IP phones can solve these problems completely.

Q2:It is troublesome that every IP Phone requires complicated network settings manually.
A: EWFC realizes fast wifi phones deployment.What you should do is conecting the AP-3 to network and powering on the wifi ip phones, then the wifi ip phones will connect thennetwork automatic.

Q3: Nowadays, WIFI is more and more popular, especially widely- used for computers. It is inconvenient to configure a special switch for an ip phone with cables.

A: Escene 5.8G WIFI Phones are designed to replace wired ip phones, they have exact the same functions as wired phones.

Q4: How to ensure the security of communication on a wireless IP phone?
A: EWFC can ensure wireless network security with one-key encryption.

Q5: Computer and IP phone may affect each other when sharing the same wireless network.
A: EWFC makes sure that the computer and ip phone connect to network separately. They will not affect each other at all.

Q6: Does EWFC need to change configuration of main network or IPPBX?
A: No need to change configuration of main network and IPPBX when using EWFC. AP-3 AP supports POE and DHCP, so just plug and play.

Q7: Where to use EWFC?
A: It is suitable for offices, warehouses, hotels,SOHO etc..

Features

- Maximum Devices: better within 50 Devices.
- Ceiling mounted/wall mounted.
- Support POE 802.3at.
- 1*gigabit LAN port.

Detail
Software Specifications
Operating Mode:AP
SSID Broadcast:Enable/Disable
SSID Number:12
WEP Security:64/128bit
WPA-PSK Security:AES/TKIP
WPA2-PSK Security:AES/TKIP
WPA Security:support
WPA2Security:support
Access Control:Connect limitation based on mac address
Transmission Power:Adjustable step by dbm
AP Isolation: support
Clients Limit: Connected user number limitation for every SSID
WMM:support
VLAN tagging for SSID: support
1-11Mbps Nominal Power:26.5+/-1.5dBm
6-9Mbps Nominal Power:25.5+/-1.5dBm
12-18Mbps Nominal Power:24.5+/-1.5dBm

224-36Mbps Nominal Power:24+/-1.5dBm
48-54Mbps Nominal Power:26.5+/-1.5dBm
MCS 0-7 Nominal Power:24+/-1.5dBm
LED Lights:Enable/Disable
Network Diagnoses:ping
Time&Date Setting: support
Circularly Reboot: support
Management: Web UI
System Log: support
Firmware upgrade: support from Web UI
Reboot Device: support from Web UI
Restore Setting: support
Backup Configuration: support
Restore Configuration: support
Compliant Standards:IEEE 802.11 b/g/n/ac
Maximum Wireless Speed: 1200Mbps
Maximum Nominal Power:
18dBm/15dBm/13.5dBm

Hardware Specifications
1xSYS Light
1x5G(5.8G) Light
1xRJ-45 10/100/1000M Interface
1xRESET
Ceiling
Power Supply: PoE 802.3at
Max Power Consumption: 17W
Dimensions: 200x200x30mm

Working Environment
Default Login IP:192.168.0.254
Default User Name:admin
Default Password:admin
Operation Temperature: -10°C~40°C
Operation Humidity:
10%-90%RH(non-condensing)
Storage Temperature: -30°C ~70°C
Storage Humidity:
10%~90%RH(non-condensing)